There is a wide range of information being circulated about different forms of chlorine dioxide. This includes the 1 + 2 DIY mix for those who prefer to make their own treatment at home, as well as the pre-mixed CDS 3000 which only requires dilution before use.
As the demand for chlorine dioxide rises, individuals are increasingly searching for ways to acquire it. One option is to purchase it in the form of water purification drops (WPD). These kits are designed to purify questionable water from sources which may not be suitable for consumption. By eliminating harmful bacteria and pathogens, the WPD effectively ensures the safety of drinking water.
It is worth noting that those who consume MMS purified water or chlorine dioxide water are realizing its advantageous effects. It’s almost like the chemistry responsible for purifying the water in your cup or bottle is also continuously working to purify the water inside your body.
When mixed with an acid like lactic, acetic, tartaric, or diluted citric, hydrochloric, sulfuric, or phosphoric acid, sodium chlorite transforms into chlorine dioxide.
You can easily make purified chlorine dioxide water at home by combining equivalent drops of part 1 (sodium chlorite) and part 2 (diluted acid). All you need is a clean, dry shot glass. Simply add one drop of each, swirl them together, and wait for 30-40 seconds. Then, pour the mixture into a larger glass of water for consumption. According to Jim Humble, this method is equivalent to using one drop of MMS.
The Master Mineral Solution of the Third Millennium, written by Jim Humble, was published prior to the widespread use of CDS. As such, his protocols and recommended number of drops were determined based on the mixing technique.
Following its introduction, various names have been given to chlorine dioxide CDS, such as CDS 3000 or chlorine dioxide solution. However, the outcome remains the same – a stabilized solution with a consistent concentration of 3,000 parts per million (3000 PPM). Unlike the Part 1 + Part 2 method, this product is already activated and does not need to be pre-mixed.
In her latest publication, “Healthy Alternative Chlorine Dioxide Uses Non-pharmacological Health Restoration,” author Paris Humble explains that eight drops of CDS 3000 are equivalent to one drop of MMS. This means that for the protocols outlined in Jim’s MMS Health Recovery Guidebook, it is necessary to multiply the recommended number of CDS 3000 drops by eight. In short, one drop of MMS is equal to eight drops of CDS 3000.
The equivalent of 8 drops of CDS 3000 is equal to 1 drop of MMS.
Regarding the safety of mms and chlorine dioxide, it should be noted that these substances are considered very safe when properly diluted. Prominent figures such as Jim Humble and Paris have recommended MMS for various uses, including human consumption. The recommended dosage to start with is 1 drop of MMS in a 4 to 8 oz. glass of water, which equates to 2,365 drops of water with one drop of chlorine dioxide. Some critics have raised concerns about the potential dangers of chlorine dioxide and warn against its use. It should be emphasized that consuming pure, undiluted chlorine dioxide would not be advised and could potentially cause harm. However, it is worth noting that there have been no reported deaths from using MMS.
When using MMS or chlorine dioxide in diluted forms, rest assured that they are generally considered safe. It should be noted, however, that while the FDA has approved chlorine dioxide for industrial purposes such as cleaning food products, equipment, and treating water, it is not deemed safe for human consumption.
When looking to buy chlorine dioxide drops, it is important to find a reliable source online. Keep in mind that there are various types of MMS available, so be cautious and do thorough research. Additionally, it is unlikely that new sources will sell MMS because it has been banned by the FDA in the USA.
The typical method for locating it is through a dual-component water purifying solution, such as Part A and Part B. To activate the sodium chlorite, simply mix one drop of each part in separate shot glasses and swirl them together before adding water. Let it sit for 30-40 seconds before pouring into 4-8 ounces of water for consumption.
Another option is to purchase a premixed solution of chlorine dioxide, known as CDS 3000. If you obtain a quantity of CDS 3000, with a concentration of 3,000 parts per million, it is important to refrigerate the opened bottle. The pre-activated solution will have a reduced shelf life but can still last up to 30 days if kept sealed and refrigerated in between uses.
Introducing an upgraded MMS with enhanced flavor.
CDS 3000, also known as chloride dioxide solution, is a popular choice among individuals due to its pleasant taste compared to the laborious DIY mixing method. This improved flavor is attributed to the solution’s unique manufacturing process involving distillation. Through this meticulous method, which can span up to 48 hours, activated sodium chloride expels gases that are then utilized to create the highly concentrated 3,000 PPM solution. It is believed that this concentration is the maximum amount of gas that can be suspended in water using this advanced technique.
Hence, you will discover that the expense of CDS 3000 is significantly higher compared to creating it in person using a readily available two-component blend.